Ideas, Technology and Performances for Concrete Blocks Splitting
Automatic concrete splitting line TS 136/40 120T
Mod. Baviera
AUTOMATIC CONCRETE SPLITTING LINE
High performance automatic concrete splitting line, sturdy and reliable, it is able to produce large quantities of top quality split concrete blocks.
Exclusive Techno Split technology uses two structures on the concrete splitting machine. The external structure allows a more precise guide of the descent of the upper blade and allows the splitting action from bottom to top, offering a significant improvement in the quality of processing.
The advance of the blocks under the splitter blade, the evacuation of technical waste, the rotation of the bench to allow processing on the remaining two faces of the block, are fully automatic while the loading and unloading operations are managed by a pre-existing gripper on the customer’s premises.
The concrete splitting line is built with only the best components on the market, able to guarantee precision and high performance.
The whole structure is appropriately oversized in order to be long-lasting while optional extras, such as the side blades penetrating the block simultaneously with the upper and lower blade, further improve the quality of the finished product.
Baviera
Strong points
- Splitting technology from bottom to top to improve processing quality
- Double structure of the concrete splitting machine for a more precise descent of the upper blade
- Automatic advance, splitting, block rotation and evacuation of technical waste
- Splitting in a single work cycle of all 4 faces of the block without using two concrete splitting machines
- Possibility of customisation in the composition of the system and its options
- High quality of the finished product
- Large quantity of split products
- Brushless servomotors
- Remote assistance
Description of the work cycle of concrete splitting line
Once the blocks to be split have been loaded on the inlet conveyor, the pusher bars push the block under the splitter blade, performing all the splits envisaged by the recipe and evacuating any technical waste.
The semi-finished blocks are taken to the outlet rotating table, which by lifting and turning through 90 degrees positions the blocks with the face still to be processed under the blade that will make the splits.
The finished blocks with the 4 split block faces return to the inlet conveyor where the pusher bars will push the blocks all the way down the line in order to facilitate unloading with a pneumatic or automatic gripper.
Concrete splitting machine technical data
Blade length
mm 1.360
Splitting height
mm 400
Splitting force
Ton 120
→ Finished products ←
Splitted concrete steps
Splitted concrete block
for wall cladding
and retaining walls
Palisaden
Follow us